Timing angles
- Make
- Fiat
- Model
- Multipla Factory Service Manual
- Year
- 1998–2010
- Section
- Engine › Timing angles
SpecificationsTiming angles
Timing angles
| 1581 16v | BIPOWER | BLUPOWER | LPG | 1910 JTD | ||
|---|---|---|---|---|---|---|
| Timing check clearance (mm) | Inlet | 0.45 | 0.45 | 0.45 | 0.45 | 0.30 |
| Exhaust | 0.45 | 0.45 | 0.45 | 0.45 | 0.35 | |
| Inlet | Opening (before TDC) | -4° 0° (*) | -4° 0° (*) | -4° | 0° | 0° |
| Closes (after BDC | 38° 34° (*) | 38° 34° (*) | 35° | 34° | 32° 26˚ (**) | |
| Exhaust | Opens (before BDC) | 28° 24° (*) | 28° 24° (*) | 33° | 24° | 32° 40˚ (**) |
| Closes (after TDC) | -4° 0° (*) | -4° 0° (*) | 1° | 0° | 0° - 2˚ (**) | |
(*) Euro 3 versions
(**) MY 2003
Parts & tools for this job For 1998 Fiat Multipla
- PARTEngine gasket setSearch: Fiat Multipla 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.