21 Gearbox and differential: Tightening torques
- Make
- Fiat
- Model
- Panda (141) Factory Service Manual
- Year
- 1986–2003
- Section
- Tightening torques › Tightening torques
21 Gearbox and differentialTightening torques
Tightening torques
| DESCRIPTION | Thread size | Torque daNm |
|---|
EXTERNAL GEARBOX CONTROLS
| DESCRIPTION | Thread size | Torque daNm |
|---|---|---|
| Gear lever mounting fixing, «Nyloc» nut | M 6 | 0,4 |
| Selector linkage to gear lever, nut for bolt | M 6 | 0,7 |
| Selector linkage support brackets fixing, bolt | M 8 x 1,25 | 2,4 |
TIGHTENING TORQUES FOR 4 x 4 VERSION COMPONENTS
| DESCRIPTION | Thread size | Torque daNm |
|---|---|---|
| Gear engagement upper relay lever fixing, nut | M 10 x 1,25 | 3,1 |
| Power unit mounting bracket spacer | M 14 x 1,5 | 14,5 |
| Rear drive power take off mounting, nut for stud | M 10 x 1,25 | 5 |
| Power take off relay mounting to cover fixing, bolt | M 8 | 2,7 |
| Power output shaft fixing, ring nut | M 35 x 1,5 | 20 |
| Bevel pinion to reduction gear mounting, ring nut | M 26 x 1,5 | 23 ÷ 32 |
| Selector spring push rod cover | M 14 x 1,25 | 4 |
| Reduction gear power take off cover drain plug | M 12 x 1,5 | 3 |
| Rear wheel drive engagement fork fixing, bolt | M 6 x 1 | 1 |
| Relay lever mounting to bodyshell fixing, bolt | M 6 | 0,4 |
| Rod to relay lever fixing, nut | M 6 | 0,7 |
| Relay lever to mounting fixing, nut for bolt | M 10 | 3,1 |
| Rod to relay lever fixing, nut | M 6 | 0,7 |
Parts & tools for this job For 1986 Fiat Panda
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.