Engine oil collection MANIFOLD - R.R.

Operation 1080D35 · Crankcase vapour/gas recirculation system

1.3 JTD 16v

Removing

Remove the car from the ramps.

Disconnect the battery terminal.

- 4450B04 right front wheel r r

- 5530A14 alternator - r+r for versions with air conditioner

- 5530A40 alternator brackets/mount/spacer - r r

Disconnect the electrical connections from the starter motor and move them aside.

1. Loosen the band and disconnect the engine oil recovery pipe, engine oil recovery manifold side.

2. Undo the bolts (2a) and remove the engine oil recovery manifold (2b) complete with gaskets (2c).

Refitting

Fit the engine oil recovery manifold complete with gaskets in place and secure it using the bolts.

Connect the engine oil recovery pipe, engine oil recovery manifold side, and tighten the band.

Connect the electrical connections to the starter motor.

- 5530A40 alternator brackets/mount/spacer - r r

- 5530A14 alternator - r+r for versions with air conditioner

- 4450B04 right front wheel r r

Connect the battery negative terminal.

Remove the vehicle from the ramp.