Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Fiat Panda Factory Service Manual (2003-2012)08 · Engine
08 · Engine

Overhead camshaft rear cover - r + r and replace seals

Make
Fiat
Model
Panda Factory Service Manual
Year
2003–2012
Section
Timing system › Overhead camshaft rear cover - r + r and replace seals
EngineOverhead camshaft rear cover - r + r and replace seals

Overhead camshaft rear cover - r + r and replace seals

Operation 1036B34 · Overhead camshaft

1.1

Removing

- 1048A10 air cleaner filtering element - replace

- 5530B10 battery - r+r

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

1. Disconnect the spark plug high tension leads.

2. Disconnect the coil supply electrical connectors.

NameConnector
2Ignition coilA30A
NameConnector
2Ignition coilA30B

3. Undo the nuts (3a) and the fixing bolt (3b) and remove the coil mounting/rear cover (3c).

Overhead camshaft rear cover - r + r and replace seals

1.2 8v

Removing

- 1048A10 air cleaner filtering element - replace

- 5530B10 battery - r+r

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

1. Disconnect the spark plug high tension leads.

2. Disconnect the coil supply electrical connectors.

NameConnector
2Ignition coilA30A
NameConnector
2Ignition coilA30B

3. Undo the nuts (3a) and the bolt (3b) and remove the coil supply / rear cover (3c).

Overhead camshaft rear cover - r + r and replace seals

1.1

Refitting

Fit the coil mounting/rear cover tightening the bolt and the nuts.

Connect the coil supply electrical connectors.

NameConnector
Ignition coilA30A
NameConnector
Ignition coilA30B

Connect the high tension leads to the spark plugs.

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

- 5530B10 battery - r+r

- 1048A10 air cleaner filtering element - replace

1.2 8v

Refitting

Fit the coil support / rear cover tightening the fixing bolt and nuts.

Connect the coil supply electrical connectors.

NameConnector
Ignition coilA30A
NameConnector
Ignition coilA30B

Connect the high tension leads to the spark plugs.

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

- 5530B10 battery - r+r

- 1048A10 air cleaner filtering element - replace

Parts & tools for this job For 2003 Fiat Panda

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.