Toothed drive pulley - r + r with timing belt removed
- Make
- Fiat
- Model
- Panda Factory Service Manual
- Year
- 2003–2012
- Section
- Timing system › Toothed drive pulley - r + r with timing belt removed
‹ Prev Toothed-driven pulley (one) - r + r with timing belt removedNext › Toothed drive pulley - r + r
EngineToothed drive pulley - r + r with timing belt removed
Toothed drive pulley - r + r with timing belt removed
Removing
1. Fit the tool (1a), undo the fixing bolt (1b) and remove the toothed drive pulley (1c).
| Name | Country | |
|---|---|---|
| 1a | Counter-torque | 1.870.744.000 |
Removing
1. Fit the tool (1a), undo the fixing bolt (1b) and remove the toothed drive pulley (1c).
| Name | Country | |
|---|---|---|
| 1a | Counter-torque | 1.870.744.000 |
Refitting
1. Fit the pulley (1a) and position the tool (1b) and tighten to torque the fixing bolt (1c) of the toothed drive pulley.
| Name | Country | |
|---|---|---|
| 1a | Counter-torque | 1.870.744.000 |
| Name | Country | |
|---|---|---|
| Protractor | 1.860.942.000 |
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 1c | Bolt | TOOTHED DRIVE PULLEY | M11 | 2 + 90° |
Refitting
1. Fit the pulley (1a) and position the tool (1b) and tighten to torque the bolt (1c) securing the toothed drive pulley.
| Name | Country | |
|---|---|---|
| 1a | Counter-torque | 1.870.744.000 |
| Name | Country | |
|---|---|---|
| Protractor | 1.860.942.000 |
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 1c | Bolt | TOOTHED DRIVE PULLEY | M11 | 2 + 90° |
‹ Prev Toothed-driven pulley (one) - r + r with timing belt removedNext › Toothed drive pulley - r + r
Parts & tools for this job For 2003 Fiat Panda
- PARTTiming belt kitSearch: Fiat Panda 2003 timing belt kit
- TOOLEngine timing tool setSearch: Fiat engine timing tool set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.