Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Fiat Panda Factory Service Manual (2003-2012)16 · Heating, air conditioning and auxiliary units
16 · Heating & A/C

Heater box - r+r

Make
Fiat
Model
Panda Factory Service Manual
Year
2003–2012
Section
Heater › Heater box - r+r
Heating, air conditioning and auxiliary unitsHeater box - r+r

Heater box - r+r

Operation 5020A10 · Box and components

Before working on the Air Bag system, the following preliminary operations must be carried out: (1) turn the ignition OFF and extract the key; (2) disconnect the battery terminals and insulate them; (3) wait for at least 10 minutes before proceeding.

FOLLOW ALL THE RECOMMENDED SAFETY RULES (see assembly 5508C - AIR BAG SYSTEM)

Removing

- 5580C18 air bag module - r+r

Before removing the steering wheel, position the wheels as parallel as possible to the longitudinal axis of the vehicle.

- 4110A10 steering wheel - r+r for replacement or checks

- 7040A26 steering column trim - r+r

- 5550A10 stalk unit assembly - r+r

- 7040A23 frame of instrument panel on facia - r r

- 5560B10 analogue control panel - r+r

- 7040A28 TRIM on gearbox control panel - R.R.

- 7040A37 fuse box cover - r r

- 5580C26 LOCK BARREL KEY/SWITCH for deactivating passenger 'AIR BAG - R.R.

Remove the compartment as described in the procedure:

- 7040A18 glove compartment on facia - arrange

- 5010C14 top outlet (one) on fascia - r+r

- 5580C22 AIR BAG MODULE - Passenger side - R.R.

- 7040A78 radio compartment box r r

- 7040A72 UPPER CENTRAL DOCUMENT HOLDER on dashboard - R.R.

- 7040A56 switch panel/support(push buttons)-r r

- 5020B22 heater control support control (one) - arrange

- 7040A17 air conditioner controls

- 7040A10 instrument facia trim - r+r

- 7040L42 sill plate connection of one front door (1), lh or rh - r r

- 7210E36 R.R. FRONT SIDE DOOR

- 7040A98 instrument facia trim support beam - r r with facia removed

Refitting

- 7040A98 instrument facia trim support beam - r r with facia removed

- 7210E36 R.R. FRONT SIDE DOOR

- 7040L42 sill plate connection of one front door (1), lh or rh - r r

- 7040A10 instrument facia trim - r+r

- 7040A17 air conditioner controls

- 5020B22 heater control support control (one) - arrange

- 7040A56 switch panel/support(push buttons)-r r

- 7040A72 UPPER CENTRAL DOCUMENT HOLDER on dashboard - R.R.

- 7040A78 radio compartment box r r

- 5580C22 AIR BAG MODULE - Passenger side - R.R.

- 5010C14 top outlet (one) on fascia - r+r

Fit the compartment as described in the procedure:

- 7040A18 glove compartment on facia - arrange

- 5580C26 LOCK BARREL KEY/SWITCH for deactivating passenger 'AIR BAG - R.R.

- 7040A37 fuse box cover - r r

- 7040A28 TRIM on gearbox control panel - R.R.

- 5560B10 analogue control panel - r+r

- 7040A23 frame of instrument panel on facia - r r

- 5550A10 stalk unit assembly - r+r

- 7040A26 steering column trim - r+r

- 4110A10 steering wheel - r+r for replacement or checks

- 5580C18 air bag module - r+r

Connect the battery terminals.

Check the operation of the Air Bag system using the Examiner or other diagnostic equipment.

Parts & tools for this job For 2003 Fiat Panda

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.