R.R. FRONT SIDE DOOR

Operation 7210E36 · EXTERNAL PARTS

Removing

Disconnect the battery negative terminal.

- 7040L42 sill plate connection of one front door (1), lh or rh - r r.

1. Disconnect the electrical connections.

2. Remove the guard and release the electrical connections.

1. Undo the bolt fixing the door check strap.

2. Undo the bolts (2a) and (2b) fixing the hinges.

3. Release the cable duct and release the door wiring.

1. Lift up the door and remove it.

Refitting

Check that the front door is not damaged.

If necessary touch up the paintwork.

Position the front door on the hinges.

Tighten the bolts fixing the hinges to the recommended torque.

Tighten the bolt fixing the door check strap to the recommended torque.

Position the wiring inside the housing in the bodyshell and position the cable duct.

Position the guard and connect the electrical connections.

- 7040L42 sill plate connection of one front door (1), lh or rh - r r

Check the alignment of the front door and, if necessary, carry out the following procedure:

- 7005A14 front side door - adjust centering and moulding - includes adaptation of hinges and seals on door compartment

Connect the battery negative terminal.