R.R. FRONT BUMPER

Operation 7210E10 · EXTERNAL PARTS

Removing

1.3 JTD 16v · SUV

Removing

Position the vehicle on a lift.

Disconnect the negative battery terminal.

Op. 7055A65 FRONT LIGHT CLUSTER MOULDING.FRAME (ONE) LH OR RH R R

[Both]

Op. 7055A42 FRONT GRILLE - R+R

Op. 4450B12 FRONT OR REAR WHEELS (TWO) - R+R

Op. 7055B65 ENGINGE BAY DUSTGUARD PROTECTION IN LEFT FRONT WHEEL ARCH R R

Op. 7055B66 ENGINE BAY DUSTGUARD PROTECTION IN RIGHT FRONT WHEEL ARCH R R

Op. 7055A24 MOULDING ON FRONT WHEEL ARCH ONE LH OR RH R R

[Both]

Op. 5550C30 L/H OR R/H FRONT TURN SIGNAL (ONE) - R+R

[Both]

1. Working from the right turn indicator seat, undo the clip and disconnect the headlamp washer pipe.

Collect the coolant in a suitable container.

1. Working in the wheel arch compartments, unscrew the side bolts.

2. Undo the lower fixing bolts.

3. Undo the upper retaining bolts.

1. Remove the bumper complete with the headlamp washer pipes.

Refitting

1. Position the bumper in its seat.

1. Tighten the upper fixing bolts.

2. Tighten the lower fixing bolts.

3. Working from the wheel arch compartments, tighten the side bolts.

1. Working from the right direction indicator seat, connect the headlamp washer pipe and secure with the clip.

Op. 5550C30 L/H OR R/H FRONT TURN SIGNAL (ONE) - R+R

[Both]

Op. 7055A24 MOULDING ON FRONT WHEEL ARCH ONE LH OR RH R R

[Both]

Op. 7055B66 ENGINE BAY DUSTGUARD PROTECTION IN RIGHT FRONT WHEEL ARCH R R

Op. 7055B65 ENGINGE BAY DUSTGUARD PROTECTION IN LEFT FRONT WHEEL ARCH R R

Op. 4450B12 FRONT OR REAR WHEELS (TWO) - R+R

Op. 7055A42 FRONT GRILLE - R+R

Op. 7055A65 FRONT LIGHT CLUSTER MOULDING.FRAME (ONE) LH OR RH R R

[Both]

Connect the negative battery terminal.

Remove the vehicle from the lift.