R.r. rear side door
- Make
- Fiat
- Model
- Panda Factory Service Manual
- Year
- 2003–2012
- Section
- Removing refitting › R.r. rear side door
Body panels and frameR.r. rear side door
R.R. REAR SIDE DOOR
Removing
Disconnect the battery negative terminal.
1. Disconnect the electrical connection.
| Name | Connector | |
|---|---|---|
| 1 | Rear left door connection | D35 |
| Name | Connector | |
|---|---|---|
| 1 | Rear right door connection | D36 |
2. Undo the bolt fixing the door check strap.
3. Unscrew the hinge retaining bolts.
Lift up the rear door and remove it.
Refitting
Check that the rear door is not damaged.
If necessary touch up the paintwork.
Position the rear door on the hinges.
Tighten the bolts fixing the hinges to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Bolt | REAR SIDE DOOR | M6 | 1.5 |
Tighten the bolt fixing the door check strap to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Bolt | REAR SIDE DOOR | M8 | 2.5 |
Connect the electrical connection.
| Name | Connector | |
|---|---|---|
| Rear left door connection | D35 |
| Name | Connector | |
|---|---|---|
| Rear right door connection | D36 |
Check the alignment of the rear door and, if necessary, carry out the following procedure:
Connect the battery negative terminal.
Parts & tools for this job For 2003 Fiat Panda
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.