Steering control shaft joints - tighten screws
- Make
- Fiat
- Model
- Panda Factory Service Manual
- Year
- 2003–2012
- Section
- Steering control and linkage › Steering control shaft joints - tighten screws
‹ Prev Steering control shaft SUPPORT - R.R.Next › Intermediate shaft connected to steering box - r.r.
SteeringSteering control shaft joints - tighten screws
Steering control shaft joints - tighten screws
1. Tighten bolt (1a) securing steering column (1b) to the steering box.
The bolt for the element fixing the steering shaft coupling should fit in the splining on the steering box pinion.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 1a | Bolt | STEERING SHAFT JOINT FASTENERS | M8 | 3.2 ÷ 4.2 |
‹ Prev Steering control shaft SUPPORT - R.R.Next › Intermediate shaft connected to steering box - r.r.
Parts & tools for this job For 2003 Fiat Panda
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Fiat power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.