Rear suspension beam - r r

Make

Fiat

Model

Panda Factory Service Manual

Year

2003–2012

Section

Rear suspension › Rear suspension beam - r r

Suspension and wheelsRear suspension beam - r r

REAR SUSPENSION BEAM - R R

Operation 4420D42 · REAR SUSPENSION AXLE/CROSSBEAM

1.2 8v

Removing

Position the vehicle on a lift.

Op. 4450B06 LEFT REAR WHEEL R R

Op. 4450B08 RIGHT REAR WHEEL R R

[Both]

Op. 4420A30 L/H OR R/H REAR SUSPENSION DAMPER (ONE) - R+R

[Both]

Op. 2410A52 VISCOUS JOINT BETWEEN THE TRANSMISSION SHAFTS - R.R. FOR PERMANENT VERSION

Op. 1076B11 FULL EXHAUST PIPING - R.R. FOR FOUR-WHEEL DRIVE MODELS

Op. 2720C10 DIFFERENCIAL UNIT - R.R.

Op. 4420C10 REAR SUSPENSION STABILIZER BAR - R+R

Op. 2720D10 SEMISHAFT WITH LEFT OR RIGHT JOINT (ONE) - R.R.

[Both]

Op. 4420B10 L/H OR R/H REAR SUSPENSION WISHBONE (ONE) - R+R

[Both]

1. Position a hydraulic lift (1a) with support plate (1b).

	Description	Code	Function
1b	Plate	1.870.856.000	Support

2. Undo the bolts (2a) and remove the rear suspension beam (2b).

Refitting

Position the rear suspension beam and tighten the bolts.

Op. 4420B10 L/H OR R/H REAR SUSPENSION WISHBONE (ONE) - R+R

[Both]

Op. 2720D10 SEMISHAFT WITH LEFT OR RIGHT JOINT (ONE) - R.R.

[Both]

Op. 4420C10 REAR SUSPENSION STABILIZER BAR - R+R

Op. 2720C10 DIFFERENCIAL UNIT - R.R.

Op. 1076B11 FULL EXHAUST PIPING - R.R. FOR FOUR-WHEEL DRIVE MODELS

Op. 2410A52 VISCOUS JOINT BETWEEN THE TRANSMISSION SHAFTS - R.R. FOR PERMANENT VERSION

Op. 4420A30 L/H OR R/H REAR SUSPENSION DAMPER (ONE) - R+R

[Both]

Op. 4450B08 RIGHT REAR WHEEL R R

[Both]

Op. 4450B06 LEFT REAR WHEEL R R

15 Steering & suspension