REAR SUSPENSION STABILIZER BAR - R+R

Operation 4420C10 · REAR SUSPENSION STABILIZER BAR/LINKS

1.2 8v · 4X4

Removing

Position the vehicle on a lift.

Raise the vehicle.

1. Undo the fixing bolts (1a) and nuts (1b).

2. Release and remove the rear suspension anti-roll bar.

Refitting

Place the rear anti-roll bar in position.

Tighten the bolts securing the rear anti-roll bar to the supports on the vehicle.

Tighten the nuts fixing the connecting rods to the suspension arm to torque.

Lower the vehicle.

Remove the vehicle from the lift.