Esp - description
- Make
- Fiat
- Model
- Panda Factory Service Manual
- Year
- 2003–2012
- Section
- Vehicle electronic systems › Esp - description
ESP - DESCRIPTION
Description
The management of the ESP function is entrusted to the braking system control unit which, by processing the values acquired from the various sensors (lateral acceleration sensor, slewing sensor, steering angle sensor, wheel rpm sensors and pressure sensors) using software algorithms, monitors the dynamic control parameters (slipping of the wheels, axle drift, geometry angle) and interprets any errors made by the driver implementing suitable measures to restore the vehicle to a stable condition.
In addition to the sensors mentioned above and obviously the control unit, the system interfaces:
- on the high speed CAN line (
- See E1050 CAN CONNECTION LINES
- with the power unit (brake pump);
- with the electronic throttle;
- with the control panel (active type warning lights);
- with the steering wheel/steering column (steering sensor installation);
- with the centre floor/passenger compartment (slewing sensor and lateral acceleration sensor installation);
- engine compartment layout (specific ABS installation).
Description
The management of the ESP function is entrusted to the braking system control unit which, by processing the values acquired from the various sensors (lateral acceleration sensor, slewing sensor, steering angle sensor, wheel rpm sensors and pressure sensors) using software algorithms, monitors the dynamic control parameters (slipping of the wheels, axle drift, geometry angle) and interprets any errors made by the driver implementing suitable measures to restore the vehicle to a stable condition.
In addition to the sensors mentioned above and obviously the control unit, the system interfaces:
- on the high speed CAN line (
- with the power unit (brake pump);
- with the electronic throttle;
- with the control panel (active type warning lights);
- with the steering wheel/steering column (steering sensor installation);
- with the centre floor/passenger compartment (slewing sensor and lateral acceleration sensor installation);
- engine compartment layout (specific ABS installation).
Parts & tools for this job For 2003 Fiat Panda
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.