Description
- Make
- Fiat
- Model
- Punto (176) Factory Service Manual
- Year
- 1993–1999
- Section
- Engine ('97 range) › Description
00 Introduction and technical dataDescription
DESCRIPTION
| DESCRIPTION | Values in mm | |
|---|---|---|
| 4-6 | Gudgeon pin Small end |
0,014 ÷ 0,035 |
| 8 | Main journals Ø1 { 1 2 3 } |
47,982÷47,988 |
| 47,988÷47,994 | ||
| 47,994÷48,000 | ||
| Crank pins Ø2 { A B C } |
41,990÷42,008 | |
| – | ||
| – | ||
| L1 | 23,975÷24,025 | |
| 9 | Crankshaft bearings L { 1 2 3 } |
1,836 ÷ 1,840 |
| 1,843 ÷ 1,847 | ||
| 1,848 ÷ 1,852 | ||
| Ø < | 0,254 ÷ 0,508 | |
| 9-8 | Crankshaft bearings - Main journals | 0,025 ÷ 0,040 |
| 10 | Big end bearings L | 1,544 ÷ 1,548 |
| Ø < | 0,254 ÷ 0,508 | |
Original page
Parts & tools for this job For 1993 Fiat Punto
- PARTEngine gasket setSearch: Fiat Punto 1993 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.