P3m12ra01
- Make
- Fiat
- Model
- Punto (176) Factory Service Manual
- Year
- 1993–1999
- Section
- Engine ('97 range) › P3m12ra01
00 Introduction and technical dataP3m12ra01
1242 16v
Engine: cylinder block/crankcase, crankshaft and associated components
| DESCRIPTION | 1242 16v | ||
|---|---|---|---|
| Values in mm | |||
| 10-8 | Big end bearings - Main journals | A | 0,024 ÷ 0,060 |
| B | – | ||
| C | – | ||
| 11 | Thrust washers | S | 2,310 ÷ 2,360 |
| S FIA T | 0,127 | ||
| 11-8 | Crankshaft end float | 0,055 ÷ 0,265 | |
Diagram showing connecting rod- piston assembly and direction of rotation in engine
- Area where number of cylinder bore to which con- necting rod belongs is stamped
- Direction of engine rotation
(The arrow shows the direction of rotation of the engine as seen from the timing side)
Value (in mm) of offset between connecting rod ax- is and piston axis
D= 0,85 ÷ 1,15
P3M12RA01
Original page
Parts & tools for this job For 1993 Fiat Punto
- PARTEngine gasket setSearch: Fiat Punto 1993 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.