Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)01 · 00 Introduction and technical data
01 · General

Punto 1372 Turbo

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Planned maintenance › Punto 1372 Turbo
00 Introduction and technical dataPunto 1372 Turbo
Diagram of engine components with callout numbers 1, 2, and 3
Diagram of engine components with callout numbers 1 and 2
Diagram of engine components with callout numbers 1 and 2

Punto 1372 Turbo

  1. Remove the complete air filter, disconnect pipes (1) and (2) and the electrical connector (3).
  2. Remove the tappet cover acting on the appropriate fixing bolts after having disconnected the engine oil dip stick (1) and the cable duct (2). Then proceed with checking the tappet clearance.

Punto 1581

  1. Remove the complete air filter, disconnect the electrical connector (1) and the oil vapour recovery pipe (2).
  2. Remove the tappet cover acting on the relevant fixing bolts, then proceed with checking the tappet clearance.
Diagram of engine valve cover area

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.