Punto 1372 Turbo

Punto 1372 Turbo

Position the vehicle on a lift, then:

• disconnect the negative battery lead;
• remove the right front wheel;
• remove the right wheel arch liner.

1. Loosen the tension for the air conditioning compressor drive belt, acting on the tensioner micro-metric screw; remove the belt from the damper flywheel and leave it fitted on the compressor pulley. Then remove the tensioning device for the compressor drive belt complete with moving pulley.
2. Loosen the tension for the alternator drive belt acting on the tensioning device, remove the belt from the alternator and leave it fitted on the damper flywheel.
3. Remove the shield on the bell housing and place flywheel lock 1860898000 in position.
4. Undo the nut fixing the damper flywheel, then remove the damper flywheel and the alternator drive belt. Undo the lower bolts and the two upper bolts fixing the protective cover for the timing drive belt and remove it.