Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Punto (176) Factory Service Manual (1993-1999)01 · 00 Introduction and technical data
01 · General

Coil springs

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Suspension (1108 SPI, Eastern Europe) › Coil springs
00 Introduction and technical dataCoil springs

Front suspension independent, Mac Pherson type with track control arms connected by means of two flexible bushes to a cross member.

Offset coil springs and double acting hydraulic shock absorbers. For-life joints.

Figure

COIL SPRINGS

Part number 46400817
Diameter of wire mm 12,5 ± 0,1
Number of turns 4,25
Direction of coil clockwise
Height of spring released mm 331
Height of spring under a load of: 304 ± 10 daN mm 210,5
The springs are subdivided into two categories, identifiable by a mark

yellow (1) for those under a load of:
304±10 daN height of mm >210,5
≤210,5
green (1) for those under a load of: 304±10 daN height of mm ≤210,5

(1) Springs of the same category must be fitted.

SHOCK ABSORBERS

Type: telescopic, double acting low pressure gas
Part number 7778834
Open (start of damping action) 466 ± 2,5
Closed (metal against metal) 295 ± 2,5
Travel 171

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.