Characteristics
- Make
- Fiat
- Model
- Punto (176) Factory Service Manual
- Year
- 1993–1999
- Section
- Technical data (1242 SPI CF2) › Characteristics
00 Introduction and technical dataCharacteristics
CHARACTERISTICS
| Cycle | OTTO 4 stroke | |
|---|---|---|
| Timing | single overhead camshaft | |
| Type of fuel system | Integrated I.A.W. WEBER-MARELLI electronic injection/ignition | |
| Max power | kW (EEC) (CV) (EEC) |
44 (60) |
| rpm | 5500 | |
| Max torque | daNm (EEC) (kgm) (EEC) |
9,8 (10) |
| rpm | 3000 |
TYPICAL POWER CURVES OBTAINED BY EEC METHOD
The curves illustrated can be obtained with the engine overhauled and run in (50 hours of operation) without a fan, with an exhaust silencer and air filter fitted at sea level.
Test bench cycles of overhauled engines
During the bench test for the overhauled engines it is not advisable to run the engines at maximum speed, but to stick to the figures given in the table; complete the running in of the engines in the actual cars.
Parts & tools for this job For 1993 Fiat Punto
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.