Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Punto (176) Factory Service Manual (1993-1999)01 · 00 Introduction and technical data
01 · General

Coil springs

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Technical data (1242 SPI CF2) › Coil springs
00 Introduction and technical dataCoil springs

Front suspension independent, Mac Pherson type with track control arms connected by two flexible bushes to a cross member.
Offset coil springs and double acting hydraulic shock absorbers.
For-life joints.

Diagram of engine badge showing 1242 SPI CF2

Coil springs

Coil springs
Part number7778396(▲) 7778399
Diameter of wiremm12,2±0,111,5±0,1
Number of turns3,254,25
Direction of coilclockwise
Height of spring releasedmm331389
Height of spring
under load of:
270 ± 10 daN mm210,5-
290 ± 10 daN mm-210,5
The springs are subdivided into two cate-
gories, identifiable by a mark
yellow (1) for
those under
a load of:
270 ± 10 daN height of mm>210,5-
290 ± 10 daN height of mm->210,5
green (1) for
those under
a load of:
270 ± 10 daN height of mm≤210,5-
290 ± 10 daN height of mm-≤210,5

(1) Springs of the same category must be fitted.

(▲) Versions fitted with air conditioning

Shock absorbers

Shock absorbers
Type: telescopic, double actingTelescopic, hydraulic, double acting
Part number7778834
Travel (start of damping action)mm171
Maximum extensionmm466±2,5

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.