Injection/ignition system fuses and relays

INJECTION/IGNITION SYSTEM FUSES AND RELAYS

1. General system protective fuses

The general injection/ignition system protective fuses are housed in the engine compartment in a container; to gain access to them, remove the cover releasing it from the side clips.

1. Injection/ignition system 30A protective fuse.
2. 40A fuse protecting consumers controlled by the ignition.

2. Fuses and relays

The following components are housed in the engine compartment on a bracket against the rear wall:

1. Twin relay.
2. 15A fuse protecting the electric fuel pump, Lambda sensor and anti-evaporation solenoid valve.
3. Front/injection cables coupling.

To gain access to the components listed above, undo the fixing bolts and remove the cover.

EARTH POINTS

3. Earth connection for rpm and T.D.C. sensor and Lambda sensor cable outer casings.
4. Power earth on engine crankcase below the starter motor.