Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

Separating gearbox from power unit

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Removing-refitting (1242) › Separating gearbox from power unit
10 EngineSeparating gearbox from power unit · page 1 of 3

SEPARATING GEARBOX FROM POWER UNIT

View of the engine bay showing the starter motor area with leads and a protective cap

Operation sequence

  • Raise protective cap, unscrew nut shown in figure and disconnect leads from starter motor;
Close-up views of the starter motor mounting bolts and connection points on the engine block
The removed starter motor unit isolated against a white background
  • unscrew bolts indicated in figure and remove starter motor;
View of the gearbox support bracket attached to the crankcase with earth leads connected
  • unscrew screws retaining gearbox support bracket to crankcase and disconnect earth leads;

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.