Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

Removing-refitting power unit

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Removing-refitting (1242) › Removing-refitting power unit
10 EngineRemoving-refitting power unit · page 1 of 10

REMOVING-REFITTING POWER UNIT

View of the battery and surrounding components in the engine compartment
View of the air cleaner assembly and associated hoses
Close-up view of the throttle body and connected linkages
Wide view of the engine bay showing the power unit and surrounding components
Remove the bonnet lid, position vehicle on lift and drain engine oil. Then proceed as follows.
  1. Disconnect leads, unscrew retaining bolts and remove battery.
  2. Unscrew bolts indicated and remove battery cradle.
  3. Disconnect clutch cable and reversing light sensor
  4. Disconnect earth lead and reverse inhibition cable.
  5. Remove gear selection lever.
  6. Unscrew the bolts indicated in the diagram and remove the air cleaner.
Close-up view of the transmission area and clutch cable connection
View of the engine mounting and surrounding components
View of the air cleaner housing being removed from the engine bay

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.