Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

Removing-refitting power unit (page 2 of 10)

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Removing-refitting (1242)
10 EngineRemoving-refitting power unit · page 2 of 10
Engine bay showing components with arrows indicating bolts to be unscrewed
Engine bay view focusing on electrical connectors and fuse holders
Close-up of engine components with arrows pointing to connectors and mounts
Wide view of the engine bay showing the overall layout of components
  1. Unscrew bolts indicated and remove the protection.
  2. Disconnect lambda probe connectors, indicated in figure.
  3. Disconnect connectors indicated in figure and release fuse holders from metal mount.
  4. Disconnect connector and vacuum pipe shown in figure.
  5. Separate lead shown in figure from battery terminal.
  6. Unscrew nut indicated in figure and disconnect accelerator cable.
Close-up of wiring connectors and vacuum pipes with arrows indicating connection points
Battery terminal area with arrows showing the lead to separate and the nut to unscrew
Throttle body area with arrows indicating the accelerator cable attachment point

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.