Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

Removing-refitting power unit (page 7 of 10)

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Removing-refitting (1242)
10 EngineRemoving-refitting power unit · page 7 of 10
A hand using a tool to prise out a steering link pin near the wheel hub assembly
  • use tool 1847035000 to prise out steering link pin;
Arrows indicating points on the brake fluid pipe and ABS system sensor cable where they should be released
  • release brake fluid pipe and ABS system sensor cable at points indicated;
Arrows showing screws on the damper and wheel hub assembly used for separation
  • separate wheel hub assembly from damper by tightening screws shown in the figure;
  • withdraw the drive shaft from the wheel hub and fasten to gearbox-differential unit;

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.