Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

Removing-refitting power unit (page 9 of 10)

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Removing-refitting (1242)
10 EngineRemoving-refitting power unit · page 9 of 10
A vehicle with a hoist hook attached to the engine bay, labeled with part number 1860592000.
- lower vehicle to ground; - position universal hook 1860592000 in power unit support brackets and apply to a hoist - use hoist to take up slack in power unit support cables;

NOTE The figures below show the location of the hooks in the power unit support brackets.

Close-up view of the left-hand side of the engine compartment showing mounting points.
Close-up view of the central area of the engine compartment showing mounting points.
Close-up view of the right-hand side of the engine compartment showing mounting points.
Two views showing the removal of the central mount from the gearbox.
The removed central mount component isolated against a white background.
- unscrew central mount bolts from body (left hand box); - position hydraulic jack in order to support power unit temporarily; - remove the central mount from the gearbox after unscrewing bolts (right hand box);

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.