Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

Separating gearbox-differential unit

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Removing-refitting (1242 16v) › Separating gearbox-differential unit
10 EngineSeparating gearbox-differential unit · page 1 of 3
Diagram showing bolts retaining the gearbox end power unit mount to the body (left) and a nut retaining the timing end power unit mount bracket (right).
  1. Unscrew bolts retaining the gearbox end power unit mount to the body.
  2. Unscrew the nut retaining the timing end power unit mount bracket to the mount.
Diagram showing the power unit being removed from below the engine bay using an A-frame lift, with a second operator standing it on a board.
  1. Remove the power unit from below the engine bay by adjusting the A-frame and lift. With the aid of a second operator, stand the power unit on a board and ensure that it is stable.

SEPARATING GEARBOX-DIFFERENTIAL UNIT

Diagram showing the starter motor area with arrows indicating nuts to be unscrewed after lifting the protective cover.

Operation sequence

  1. Lift the protective cover, unscrew the nuts and disconnect the starter motor leads.

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.