Separating gearbox-differential unit (page 3 of 3)

P3M11AX01 1. Unscrew nut joining gearbox to engine. Then separate the gearbox-differential unit from the engine.

NOTE Reverse disassembly instructions to refit the gearbox-differential unit to the engine.
To refit the power unit, simply carry out removal instructions in reverse order.

• - Prepare the engine bay to fit the power unit. Take care to position all electrical leads, pipes etc. so that they do not get in the way during installation;
• - take great care when fitting the power unit to ensure individual components are not damaged;
• - when fitting the coolant pipes, align the groove on the rubber hose with the ridge on the rigid coupling sleeve. Consult the "Removing-refitting radiator" chapter in this section when filling the cooling circuit.

Once the power unit is in place, check that the bolts retaining the power unit mounts to the body are properly tightened. Clutch pedal height

Original page