Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)04 · 21 Gearbox and differential
04 · Transmission

Speed selection cable

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Automatic transmission (Selecta, '96 update) › Speed selection cable
21 Gearbox and differentialSpeed selection cable · page 1 of 3

SPEED SELECTION CABLE

Removing-refitting

Remove battery and battery cradle from the engine bay, then:

  1. remove the retaining pin;
  1. withdraw the cable head from the transmission control lever pin;
  2. loosen the nut shown (arrowed) and withdraw the cable from the bracket;
  3. disconnect connector from probe I, then withdraw the cable from the clips.
Hand using pliers to remove a retaining pin from a cable assembly near the transmission.
Cable head being withdrawn from the transmission control lever pin area.
Arrow pointing to a nut on a bracket securing the speed selection cable.
Electrical connector being disconnected from probe I near the cable routing.

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.