Removing-refitting alarm control unit

NOTE The procedure described is for saloon versions; for the Van versions the side panel inside the luggage compartment must be removed first and then the instructions for the saloon versions can be followed.

• Working from the luggage compartment, press on the rear of the receiver to release the retaining tabs, then rotate it in the direction shown by the arrow;

• disconnect the connector and remove the receiver.

NOTE To refit, simply reverse the order of the operations carried out for the removal.

REMOVING-REFITTING ALARM CONTROL UNIT

• Working via the engine compartment, undo the bolts fixing the control unit to the support;
• disconnect the connections and remove the control unit with integrated siren.

NOTE To refit, simply reverse the order of the operations carried out for the removal.