Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)09 · 55 Electrical system
09 · Electrical

Removing-refitting junction unit

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Control units › Removing-refitting junction unit
55 Electrical systemRemoving-refitting junction unit · page 1 of 2

REMOVING-REFITTING JUNCTION UNIT

View of the lower dashboard area showing the location of the junction unit compartment with arrows indicating bolts to be removed.
  • Undo the bottom bolt securing the mounting to the control unit;
  • undo the bolt securing the compartment to gain access to the control unit;
The compartment cover has been removed, exposing the junction unit and its electrical connectors.
  • disconnect the connectors on the fuse side;
A close-up view inside the compartment showing the control unit mounted in place with arrows pointing to the securing bolts.
  • undo the bolts securing the control unit to the mounting, then rotate the control unit;

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.