Connector c
- Make
- Fiat
- Model
- Punto (176) Factory Service Manual
- Year
- 1993–1999
- Section
- Instrument panel › Connector c
‹ Prev Wiring colour codes and description of the circuits connected to each connectorNext › Removing-refitting junction unit
55 Electrical systemConnector c
CONNECTOR C
| Flat pin no. | Wire colour | Circuit involved |
|---|---|---|
| 1 | L | Rev counter signal (F) |
| 2 | LR | Fuel injection fault warning light (Z) |
| 3 | HG | Low engine oil pressure warning light (J) |
| 4 | HN | Low battery charge warning light (X) |
| 5 | CN | Anti-lock braking system (A.B.S.) fault warning light (M) |
| 6 | ZB | Anti-lock braking system (A.B.S.) fault warning light (M) |
| 7 | BR | Handbrake warning light (I) |
| 8 | BN | Low brake fluid warning light (I) |
CONNECTOR D
| Flat pin no. | Wire colour | Circuit involved |
|---|---|---|
| 1 | - | Not connected |
| 2 | AR | + 15 shared (protected) |
| 3 | - | Not connected |
| 4 | - | Engine oil pressure signal (D) |
| 5 | - | Not connected |
| 6 | N | Shared earth |
| 7 | -- | Not connected |
| 8 | LB | Main beam warning light (U) |
CHECK PANEL CONNECTION
| Flat pin no | Wire colour | Circuit involved |
|---|---|---|
| 1 | RN | Stop lights switch + 30 N.A. |
| 2 | - | Not connected |
| 3 | RG | Left stop lights connection |
| 4 | RG | Right stop lights connection |
| 5 | AR | + 15 shared (protected) |
| 6 | NZ | Electronic earth |
| A1 | Stop lights fault warning lamp |
‹ Prev Wiring colour codes and description of the circuits connected to each connectorNext › Removing-refitting junction unit
Parts & tools for this job For 1993 Fiat Punto
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.