Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Punto (176) Factory Service Manual (1993-1999)09 · 55 Electrical system
09 · Electrical

Number plate light

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Lighting › Number plate light
55 Electrical systemNumber plate light

NUMBER PLATE LIGHT

Diagram showing the location of the number plate light on the rear of the vehicle, with arrows indicating screw positions and a close-up inset of the light assembly.

Removing-refitting light

  • Undo the screws shown in the figure;
View from inside the boot showing the back of the number plate light unit mounted to the body panel.
The removed number plate light unit with its lens cover separated, showing the connector lug.
  • disconnect the connector by disengaging the lug shown in the figure, then remove the light;
  • to refit, reverse the procedure for removal.
Close-up view of the number plate light unit installed in the bumper area.

Replacing bulb

Prise off the lens and replace the faulty bulb.

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.