Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)09 · 55 Electrical system
09 · Electrical

Refitting

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Seat belt pretensioner ('97-'98 range) › Refitting
55 Electrical systemRefitting
Diagram showing the location of a screw retaining the right-hand pretensioner in its housing, indicated by an arrow.
- unscrew screw retaining and remove the right-hand pretensioner from its housing;
Diagram showing the pretensioner being angled in the direction of the arrow to be removed from the car, held by its handle.
- angle the pretensioner in the arrowed direction and remove from the car. Hold correctly by the handle as described in the safety regulations.

Refitting

Tool 1870695000 - 1870695001 must be removed from the pretensioner ONLY AFTER AFTER FASTENING THE PRETENSIONER/ INERTIA REEL UNIT TO THE CAR PILLAR to prevent injury to personnel.

Diagram showing the pretensioner refitted in its seat with a tool tightening the retaining bolt, and arrows indicating the upper and lower attachment retaining bolts.
- Refit the pretensioner in its seat and tighten the retaining bolt to a torque of 4 daNm, then remove the above tool.

Do not use percussion screwdrivers.

- Finish refitting by carrying out removal instructions in reverse order. Ensure belt upper and lower attachment retaining bolt is tightened to a torque of 4 daNm.

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.