Rear bumper
- Make
- Fiat
- Model
- Ulysse Factory Service Manual
- Year
- 2002–2010
- Section
- Removing refitting › Rear bumper
Body panels and frameRear bumper
REAR BUMPER
Removing
- Suitably protect the area surrounding the paintwork.
Take great care not to damage the paintwork.
1. Undo the upper (1a) and lower (1b) fixing bolts.
2. Remove the front bumper from the housing.
Refitting
- Place the front bumper in the housing.
- Tighten the upper and lower bolts fixing the bumper.
- Remove the protection positioned previously.
Parts & tools for this job For 2002 Fiat Ulysse
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.