OIL EXCHANGE SLEEVE - R R

Operation 1088D47 · COOLANT PIPES AND HOSES

2.0 16V JTD

Removing

Op. 7055B54 UNDER-ENGINE GUARD - R R

See in Op. 1048B22

1. Release the pipes from the heat exchanger acting on the retaining bands.

1. Open the securing band (1a) and release and remove the pipe (1b).

2. Open the band (2a) and release and remove the pipe (2b).

Refitting

- Fit the pipes on the heat exchanger and the thermostat and renew the fastening bands.

See in Op. 1048B22

Op. 7055B54 UNDER-ENGINE GUARD - R R

Op. 0010T21 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY

2.0 16v

Removing

Op. 7055B54 UNDER-ENGINE GUARD - R R

- Position a suitable container for collecting the coolant.

1. Act on the retaining bands (1a) using the tool and remove the hose (1b).

Refitting

- Fit the hose and renew the fastenings using the tool.

Op. 7055B54 UNDER-ENGINE GUARD - R R

Op. 0010T21 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY

2.2 16V JTD

Removing

Op. 7055B54 UNDER-ENGINE GUARD - R R

See in Op. 1048B22

1. Release the pipes from the heat exchanger acting on the retaining bands.

1. Open the securing band (1a) and release and remove the pipe (1b).

2. Open the band (2a) and release and remove the pipe (2b).

Refitting

- Fit the pipes on the heat exchanger and the thermostat and renew the fastening bands.

See in Op. 1048B22

Op. 7055B54 UNDER-ENGINE GUARD - R R

Op. 0010T21 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY