Parking lights not working
- Make
- Fiat
- Model
- Ulysse Factory Service Manual
- Year
- 2002–2010
- Section
- Lights › Parking lights not working
PARKING LIGHTS NOT WORKING
When the vehicle is left, with the engine switched off and the side lights activated, the parking lights do not work.
The side (parking) lights are controlled by the Steering Wheel Controls Node NVO managed by the Body Computer Node BSI and activated by the Engine Compartment Junction Unit Node BSM.
| STEP | OPERATIONS TO BE CARRIED OUT | TEST RESULTS | ||
|---|---|---|---|---|
| 0 | STEERING COLUMN SWITCH UNIT PRELIMINARY CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check that the steering column switch unit control is working properly, especially the side lights switch | Move on to Step | 1. The control does not activate the warning light in the instrument panel and the lights are not working | 1 See table I01 SIDE LIGHTS/NO. PLATE LIGHTS NOT WORKING | |
| 2. The control does not activate the warning light in the instrument panel but the lights are not working | 2. Replace the component involved (in the case of a fuse, find out what caused it to blow). | |||
| 1 | INDIVIDUAL LIGHTS CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Check, the following, in order:
| Move on to Step | 1. Number plate light(s) faulty. | 1. Replace the bulbs. | |
| 2. Front and/or rear light cluster faulty. | 2. Renew or replace the faulty light cluster. | |||
| 3. Wiring defective. | 3. Renew or replace the wiring involved. | |||
| 2 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check that the fault is no longer present | ||||
Parts & tools for this job For 2002 Fiat Ulysse
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Ulysse
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.