Electric front windows / not working
- Make
- Fiat
- Model
- Ulysse Factory Service Manual
- Year
- 2002–2010
- Section
- Window opening mechanism › Electric front windows / not working
‹ Prev Passenger side temperature adjustment does not workNext › One of the electric front windows is not working
Fault diagnosisElectric front windows / not working
ELECTRIC FRONT WINDOWS / NOT WORKING
The front windows, driver''s side and passenger side, do not work when the switches are pressed.
The supply for the door Nodes which operate the electric window motors is protected by specific fuses housed in the Body Computer Node. The networks go on stand-by 30 mins after the engine is switched off. This makes it impossible to carry out the fault diagnosis. If a diagnostic session has to be opened, start up the engine to reawaken the networks
| STEP | OPERATIONS TO BE CARRIED OUT | TEST RESULTS | ||
|---|---|---|---|---|
| 0 | PRELIMINARY CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Check the condition of the door node supply system protective fuses | Move on to Step | Fuses blown. | Replace the fuses. | |
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT. | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Check the continuity and insulation of the VAN CAR2 line connecting the NBC and the Door Nodes | Move on to Step | Line damaged | Renew the VAN CAR line between the NBC and the Door Nodes | |
| 2 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check that the fault is no longer present. | The fault persists. | Replace the Body Computer Node | ||
‹ Prev Passenger side temperature adjustment does not workNext › One of the electric front windows is not working
Parts & tools for this job For 2002 Fiat Ulysse
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.