ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Timing Belt - Vehicles Built Up To: 04-2005 > < Camshafts

C-MAX 2003.75 (06.2003-)

Engine - 1.6L Duratec-16V (Sigma) - Camshaft Seal C-MAX 2003.75 (06/2003-)
In-vehicle Repair

Special Tool(s)

Universal Flange Holding Wrench

205-072

Remover, Crankshaft Seal

303-293

Installer, Crankshaft Seal

303-395
Materials
Name
Specification
Engine Oil
WSS-M2C913-A 

Removal

  1. Remove the timing belt.
    For additional information, refer to: Timing Belt - Vehicles Built Up To: 04/2005 (303-01A Engine - 1.6L Duratec-16V (Sigma), In-vehicle Repair) /
    Timing Belt - Vehicles Built From: 04/2005 (303-01A, In-vehicle Repair).

  1. CAUTION:
    CAUTION:Install a hose (order no. E890438S) to the special tool studs, to prevent damage to the camshaft pulley.
    Using the special tool, prevent the camshaft pulleys from rotating and remove the camshaft pulleys.
    • Discard the retaining bolts.

  1. Using the special tool, remove the camshaft seals.
    • Discard the seals.

Installation
  1. NOTE:
    NOTE:Install new camshaft seals.
    Using the special tool, install the camshaft seals.
  1. NOTE:
    NOTE:Do not fully tighten the camshaft pulley retaining bolts at this stage. Make sure the camshaft pulleys rotate on the camshafts.
    NOTE:
    NOTE:Install new camshaft pulley retaining bolts.
    Install the camshaft pulleys.
  1. Install the timing belt.
    For additional information, refer to: Timing Belt - Vehicles Built Up To: 04/2005 (303-01A Engine - 1.6L Duratec-16V (Sigma), In-vehicle Repair) /
    Timing Belt - Vehicles Built From: 04/2005 (303-01A, In-vehicle Repair).

Timing Belt - Vehicles Built Up To: 04-2005 > < Camshafts