Ford Workshop Service and Repair Manuals

Remover, Crankshaft Seal

303-293 (21-143)

Installer, Crankshaft Seal

303-395 (21-171)

1. Remove the timing belt.
   For additional information, refer to: Timing Belt - Vehicles Built Up To: 04/2005 (303-01A Engine - 1.6L Duratec-16V (Sigma), In-vehicle Repair) /
   Timing Belt - Vehicles Built From: 04/2005 (303-01A, In-vehicle Repair).
   

2. Remove the crankshaft timing pulley.

3. Using the special tool, remove the crankshaft front seal.

1. Using the special tool, install the crankshaft front seal.

2. Install the crankshaft timing pulley.

3. Install the timing belt.
   For additional information, refer to: Timing Belt - Vehicles Built Up To: 04/2005 (303-01A Engine - 1.6L Duratec-16V (Sigma), In-vehicle Repair) /
   Timing Belt - Vehicles Built From: 04/2005 (303-01A, In-vehicle Repair).