| Removal and Installation Special Tool(s) | | Disconnect Tool, Spring Lock Coupling 3/4" (white) 412-040 | | | -
Remove the right-hand headlamp.
For additional information, refer to: Scheinwerfereinheit (417-01 Außenbeleuchtung, Removal and Installation).
| | | -
Drain the A/C system.
For additional information, refer to: Klimaanlage entleeren, evakuieren und befüllen (412-00 Innenraumklimatisierung - Allgemeine Informationen, General Procedures).
| 3. Remove the components in the order indicated in the following illustration(s) and table(s). CAUTION:Seal the refrigerant lines and the suction accumulator to prevent dirt ingress. 1 - Nut, suction accumulator refrigerant line to A/C compressor 2 - Suction accumulator refrigerant line to A/C compressor 3 - Seal, suction accumulator refrigerant line to A/C compressor 4 - Retaining clip, suction accumulator refrigerant line to evaporator 6 - Seals, suction accumulator refrigerant line to evaporator 8 - Bolt, suction accumulator 9 - Lower nut, suction accumulator 4. To install, reverse the removal procedure. Removal Details Item 5 : Suction accumulator refrigerant line to evaporator | | -
Disconnect the refrigerant lines using the special tool. | Item 7 : Upper nut, suction accumulator | | -
Raise the vehicle.
For additional information, refer to: Anheben mit Hebebühne (100-02 Fahrzeug anheben, Description and Operation).
| | | -
Remove the right-hand wheelhouse cover (shown with wheel removed for clarity). | |
