High Beam Headlamp Bulb - Vehicles With: High Intensity Discharge Headlamps
Exterior Lighting - High Beam Headlamp Bulb—Vehicles With: High Intensity Discharge Headlamps
C-MAX 2003.75 (06/2003-)
Removal and Installation
Removal
Remove the headlamp assembly. For additional information, refer to: Headlamp Assembly (417-01 Exterior Lighting, Removal and Installation).
WARNING:High voltages are present in the system. Ensure that the headlamp connector is disconnected before removing the headlamp rear cover. Failure to observe this instruction can lead to injury.
Remove the headlamp rear cover.
Detach the main beam bulb connector.
Detach the main beam bulb U-clip from the fixings.
Remove the main beam bulb.
Installation
CAUTION:Ensure that the internal headlamp wiring harness is not trapped when installing the headlamp rear cover.