Contour V6-153 2.5L DOHC (1996)
6. After the garter spring is expanded, pull the fittings apart.
7. Remove the tool from the disconnected coupling.
INSTALLATION
Fuel Line Coupling
1. Make sure that the garter spring is in the cage of the male fitting. If the garter spring is missing, install a new spring by pushing it into the cage
opening. If the garter spring is damaged, remove it from the cage with a small wire hook (not a screwdriver) and install a new spring.
2. Clean all dirt or foreign material from both pieces of the coupling.
WARNING: Use only the specified o-rings. Use of o-rings other than the specified type may allow the connection to leak intermittently
during vehicle operation.
Fuel Tube Coupling
3. Replace missing or damaged O-rings. With clean engine oil, lubricate the male fitting, the O-rings, and the inside of the female fitting.