Ford Workshop Service and Repair Manuals

Disconnect Tool, Spring-Lock Coupling

310–D005 (23–040)

Disconnect Tool, Spring-Lock Coupling

310–D004 (23–039)

1. Disconnect the battery ground cable.

2. Remove the air cleaner. For additional information, refer to Section  303-12B .

3. Remove the air cleaner bracket.

4. Position the shift cable to one side.

5. Disconnect the starter motor electrical connectors.

6. Remove the starter motor support bracket.

7. Release the fuel pressure. For additional information, refer to Section  310-00 Fuel System - General Information.

8. Detach the fuel supply and the fuel return line clips.

9. Using the special tool, disconnect the fuel return line.

10. Using the special tool, disconnect the fuel supply line.

11. Remove the starter motor.
    • Remove the bolts.

1. To install, reverse the removal procedure.