Removal and Installation Removal Vehicles with 2.0L engine | -
- Disconnect the intake air bypass hose.
- Disconnect the positive crankcase ventilation hoses.
- Remove the air cleaner outlet tube.
| | -
Remove the intake air resonator. | | -
Disconnect the vapor management valve electrical connector. | | -
Disconnect the vapor lines and remove the vapor management valve. | Vehicles with 2.5L engine All Vehicles | -
Disconnect the vapor management valve electrical connector. | | -
NOTE:The bolts must be secured from inside the vehicle when removing the nuts. Detach the vapor management valve. | | -
Disconnect the vacuum line from the vapor management valve. | | -
Disconnect the vapor tubes and remove the vapor management valve. | Installation | -
To install, reverse the removal procedure. | |