ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
303-14A Electronic Engine Controls - 2.0L|Specifications > < Powertrain Control Module (PCM)

Cougar 1999 (08.1998-01.2001)

Electronic Engine Controls - 2.0L - Heated Oxygen Sensor (HO2S) Cougar 1999 (08/1998-01/2001)
Removal and Installation

Removal

  1. Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.

  1. Disconnect the HO2S electrical connector.

  1. Remove the HO2S.

Installation

CAUTION:
CAUTION:When installing a new HO2S, it is possible that the new component will be supplied with a longer cable than the one removed. It is important that the cable is routed and secured in such a way that it cannot be damaged by heat or moving components and will not cause a noise, vibration or harshness (NVH) issue.
  1. To install, reverse the removal procedure.

303-14A Electronic Engine Controls - 2.0L|Specifications > < Powertrain Control Module (PCM)