ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Recircluation Blend Door Vacuum Control Motor > < Blower Motor Resistor

Cougar 1999 (08.1998-01.2001)

Control Components - Footwell Vent/Duct Blend Door Actuator Cougar 1999 (08/1998-01/2001)
Removal and Installation

Removal

  1. Remove the audio unit. For additional information, refer to Section  415-01 Audio Unit.
  1. Remove the floor console. For additional information, refer to Section  501-12 Instrument Panel and Console.

  1. Remove the instrument panel lower panel.

  1. Remove the switch assembly.
    1. Detach the switch assembly.
    1. Disconnect the electrical connectors.

  1. Detach the heater control/audio unit panel.
    1. Remove the screws.
    1. Detach the heater control panel from the clips.

  1. Remove the heater control/audio unit bezel.
    • Disconnect the electrical connectors.
    • Disconnect the vacuum lines.

  1. Remove the actuator.
    1. Disconnect the actuating rod.
    1. Disconnect the vacuum lines.
    1. Remove the nuts.

Installation

  1. To install, reverse the removal procedure.

Recircluation Blend Door Vacuum Control Motor > < Blower Motor Resistor