Removal and Installation Removal | -
Detach the lower safety belt anchor. | | -
Detach the upper safety belt anchor. - Remove the cover.
- Remove the Torx bolt.
| | -
Lower the rear seat backrest. | | -
Remove the rear seat backrest release cover. | | -
Detach the rear seat backrest release from the body. | | -
Detach the safety belt webbing from the C - pillar trim panel. | | -
Detach the safety belt retractor. - Remove the bolt.
- Lift the retractor to release the locating tangs.
| | -
Remove the safety belt assembly. - Feed the safety belt webbing through the opening above the seat backrest latch mounting.
| Installation | -
To install, reverse the removal procedure. | | |