Crown Victoria V8-4.6L SOHC VIN 6 (1996)
15. Apply Silicone Gasket and Sealant F1AZ-19562-A (WSE-M4G320-A2) or equivalent in locations shown.
16. Install front cover on engine.
17. Install front cover studs bolts and eight bolts retaining front cover to engine. Tighten to 20-30 N-m (15-22 lb-ft).
18. Apply Silicone Gasket and Sealant F1AZ-19562-A (WSE-M4G320-A2) or equivalent both places front cover meets cylinder head.
19. Position and using a suitable sealer, glue gaskets into camshaft covers and install camshaft covers onto cylinder heads.
20. Install bolts and stud bolts into RH camshaft cover. Tighten all bolts to 8-12 N-m (6.0-8.8 lb-ft).
21. Install bolts and stud bolts into LH camshaft cover. Tighten all bolts to 8-12 N-m (6.0-8.8 lb-ft).