ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 9397 > < Initial Inspection and Diagnostic Overview|Page 9395
Page 9
background image

EB4 - Check Circuit 1032 (W/BK)

-

Disconnect lighting control module C1 connector.

-

Disconnect headlamp switch C2 connector.

-

Check resistance of circuit 1032 (W/BK) between pin C2-3 of headlamp switch and pin C1-13 of lighting control module.

Is resistance 5 ohms or less?

YES

REPLACE headlamp switch. RESTORE vehicle. RETEST system.

NO

SERVICE circuit 1032 (W/BK) for open RESTORE vehicle. RETEST system. 

EB5 - Test Parking Lamp Power To Lighting Control Module

-

Remove lighting control module connector C3.

-

Check for voltage on pin C3-6 circuit 195 (T/W).

Is voltage B+?

YES

GO to EB6.

NO

SERVICE circuit 195 (T/W) from fuse junction panel to lighting control module. RETEST system.

EB6 - Test Parking Lamp Output

-

Using a jumper wire, short pin C3-6, circuit 195 (T/W) to pin C3-14, circuit 14 (BR).

Do parking lamps turn on?

YES

REPLACE lighting control module. RETEST system.

NO

SERVICE parking lamps output circuit 14 (BR). RETEST system.

EC - One Or More Parking Lamps Inoperative

Pinpoint Test EC: One Or More Parking Lamps Inoperative

EC1 - Check Supply To Suspect Parking Lamp

-

Actuate headlamp switch to the PARK position.

-

Gain access to suspect parking lamp connector. Disconnect the suspect parking lamp.

-

Using a voltmeter connected to a known good ground, connect the second lead to circuit 14 (BR) at parking lamp connector.

Is voltage B+?

YES

GO to EC2.

NO

SERVICE circuit 14 (BR) for open circuit. RESTORE vehicle. RETEST system.

EC2 - Check Suspect Parking Lamp

-

Using an ohmmeter connected to a known good ground, connect second lead to circuit 57 (BK) at parking lamp connector. Measure resistance.

Is resistance 5 ohms or less?

YES

REPLACE damaged parking lamp miniature bulb. RESTORE vehicle. RETEST system.

NO

SERVICE circuit 57 (BK) for open circuit.  RESTORE vehicle. RETEST system.

ED - Parking Lamps On Continuously

Pinpoint Test ED: Parking Lamps On Continuously

ED1 - Check Headlamp Switch Operation

-

Remove headlamp switch as outlined.

-

Disconnect headlamp switch.

Did parking lamps turn off?

YES

REPLACE damaged headlamp switch. RESTORE vehicle. RETEST system.

NO

SERVICE circuit 14 (BR) for short to B+. RESTORE vehicle. RETEST system.

Initial Inspection and Diagnostic Overview|Page 9397 > < Initial Inspection and Diagnostic Overview|Page 9395